Production of electronic table extensions

P2J Technology is a leading manufacturer of Reeco modular laboratory and workshop table extensions.

Superstructures can be modified in any way and their modular solution offers high variability.

Extensions can be purchased as accessories to existing Reeco tables.

Individual modules are placed in a standardized rack, which can be hung on the upright profiles of Reeco tables, similar to shelves, perforated panels and other accessories.

Easy access to securing elements
Short-circuit resistance of power supplies
Simple exchange of individual modules
Possible modifications of the modules according to the customer's wishes
Fast implementation

OPTIONAL MODULES

Socket module 230V/16A 4x

Socket module with cover to connect your own devices, power supplies, generators, counters, oscilloscopes, soldering stations and other devices located on the shelf or on the worktop of the Reeco table.

Module designation: ZAS230-4
Power supply: 1+N+PE ~ 50Hz 230V
Switchboard module: ROZV400-xx series, ROZV230-xx series
Protection: In the switchboard module, own circuit breaker 16A/B
Max. socket current: 16A
Degree of protection: IP40

Autotransformer 250V AC/DC

The autotrafe output is switched on by a rocker switch located between the output terminals. When it is turned on, the red on light will light up. At the AC output terminals, there is a voltage corresponding to the position of the knob mark on the scale. For DC output, the voltage will be 1.41 times greater.

Module designation: ATR 250V-2A-AC DC
Power supply: 1+N+PE ~ 50Hz 230V
Switchboard module: ROZV400-xx series, ROZV230-xx series
Fuse: Tube fuse 2.5A/T (quick characteristic)
Power consumption: 460W max.
Output voltage: 0-250VAC, 0-350VDC
Output current: 2A max.
Degree of protection: IP20

Laboratory power supply 40V/10A/400W

The device is equipped with three segment LED displays indicating:

Set / Measured output voltage
Set current limitation / Measured output current
Mode indication / Measured power supplied to the load

Module designation: LABZ40V-10A
Power supply: 1+N+PE ~ 50Hz 230V
Switchboard module: ROZV400-xx series, ROZV230-xx series
Fuse: 10A
Source power: 550W max.
Output voltage: 0 to 40V, adjustable in 40mV steps
Output current: 10A max. continuously
Output current limit: 10mA to 10A, adjustable in 10mA steps
Output terminals: 4x Terminal for device banana 4mm
Degree of protection: IP40

Fixed power supply 24V 2A AC/DC

The output of the source is switched on by a rocker switch located above the output terminals of the source. After turning it on, if everything is in order, the LED located below it will light up green. When the output current exceeds the value of 2A, the electronic reversible fuse is activated, the output of the source is switched off and the LED lights up red.

Module designation: Z24V-2A-ACDC
Power supply: 1+N+PE ~ 50Hz 230V
Switchboard module: ROZV400-xx series, ROZV230-xx series
Fuse: 10A
Source power: 110W max.
Output voltage: ~24V and =24V
Output current: 2A for each output
Output protection (for each output):
Electronic 2A reversible fuse with LED indication
2.5A fusible tube fuse accessible on the panel
Output terminals: 2x Terminal for device banana 4mm for each output
Degree of protection: IP40

Socket 400V/32A/5P

The voltage in the socket is switched on by turning the switch on the panel to position 1. The presence of voltage in the socket (on the first phase) is indicated by the red "ON" light. The socket is protected by its own 3-pole circuit breaker 16A/B on the module panel.

Module designation: ZAS400-1
Power supply: 3+N+PE ~ 50Hz 230V/400V
Switchboard module: ROZV400-xx series
Protection: Circuit breaker 16A/B
Socket: CEE 400V/32A/5 poles
Max. output current: 16A
Level of protection: IP40

Terminal AC output 400V

The voltage on the terminals is switched on by turning the switch on the panel to position 1. The presence of voltage (on the first phase) is indicated by the red "ON" light. The output is protected by its own 3-pole circuit breaker 16A/B on the module panel.

Attention: The output is NOT galvanically separated from the mains!

Module designation: Z400V-AC
Power supply: 3+N+PE ~ 50Hz 230V/400V
Switchboard module: ROZV400-xx series
Protection: Circuit breaker 16A/B
Output: 4x safety terminal (3L+N), 1x PE terminal
Max. output current: 16A
Degree of protection: IP20

Panel ammeters 40A/AC/3x

The measured current is fed to a pair of safety terminals next to the selected meter. The zero position of the indicating hand can, if necessary, be reached using a suitable screwdriver directly on the gauge.

Note: The module is only intended for indicative measurement of alternating currents. Not calibrated.

Micro soldering iron 90W

Control of the device is described in the supplied instructions for the used QUICK TS1100 micro soldering iron.

Module designation: MPAJKA-90W
Power supply: 1+N+PE ~ 50Hz 230V
Switchboard module: ROZV400-xx series, ROZV230-xx series
Protection: circuit breaker 10A/B in the switchboard module
Power consumption: 90W
Degree of protection: IP40

Modular superstructures

We offer racks in two sizes depending on the size of the table:
750mm for tables with a length of 1500mm
900mm for tables with a length of 1200mm or 1800mm
The rack occupies half the length of the table and it is possible to place two racks with different modules next to each other or one rack and one shelf to accommodate your own devices
Contact us for a price quote tailored to your requirements

COMPREHENSIVE SOLUTIONS

Central control from the teacher's desk

ADAPTABILITY

At the customer's request, we can fine-tune the color of the table to the company's shades

SPEED

Only six weeks passed from the first proposal of the solution to the actual implementation